
Hygiene Station

The disinfection tray DW is used for simple sole disinfection, or in the floor-integrated version also for the disinfection of wheels and castors of mobile equipment.
The disinfection trays are available in different sizes and designs, with or without automatic filling and adding of disinfectant.
Option
-
Automatic dosage of cleaning agent
Technical data DW
Dimensions (WxDxH) 1090 x 640 x 190 mm
Water outlet DN 50

The lockers EGS are all equipped with a small compartment for hats or industry helmet and a clothes rail with 3 hooks. The slanted roof enables easy cleaning, and at the same time prevents any utensils being placed on top.
The locker can, when closed, be secured with a padlock. Holes in the doors and the bottom of the locker ensure optimal air circulation.
The locker is available in 1 or 2 storey form.
Option
Middle wall to separate black and white clothing
Locking system with cylinder locks
Technical data
EGS-1 Dimensions (WxDxH) 315 x 500 x 2160 mm
EGS-2 Dimensions (WxDxH) 600 x 500 x 2160 mm
EGS-3 Dimensions (WxDxH) 885 x 500 x 2160 mm
EGS-4 Dimensions (WxDxH) 1170 x 500 x 2160 mm

The compartment shoe cabinet EFS, with its body closed on three sides, serves the open storage of shoes and is available in several sizes.
The shelf spaces of the individual shoe compartments consist of robust wire netting grids. The extendible and detachable drawers below cover 2 or 3 compartments each and collect residues that may drip from the shoe soles.
This construction ensures a particularly hygienic storage of shoes as well as easy and optimal cleaning of the entire shoe cabinet. Its slanted roof ensures simple cleaning and prevents undesirable depositing of various items.
Technical Data
EFS 2/5 Dimensions (WxDxH) 10
Compartments 610 x 450 x 1630/1830 mm
EFS 3/5 Dimensions (WxDxH) 15
Compartments 900 x 450 x 1630/1830 mm
EFS 5/5 Dimensions (WxDxH)25
Compartments 1480 x 450 x 1630/1830 mm
Compartment size (WxDxH)260 x 450 x 200 mm


The boot dryer STT is available for wall or floor mounting and features a warm air blower with thermostat and daily timer as well as a switch Hand – 0 – Auto.
To dry the boots, the drying program runs for a time that can be adjusted (90-120 minutes).
The air sucked in by the blower is warmed up and blown into the boots.
Option
-
Wall or Floor mounted
-
Ozone Disinfection - By way of an ozone generator the drying air is enriched with ozone. The ozone mixture reliably kills germs, fungi and microorganisms. The ozone levels in this case are completely safe.
-
Weekly timer - The weekly timer enables the programming of the boot dryers over the course of a week.
-
Valve Heads - The valve heads provide warm air only when boots are attached. In this way, any unwanted release of air can be prevented.
​
Technical Data
Electrical connection 230 V/N/PE, 50/60 Hz
Typ Boot capacity Dimensions (W x D x H) Heating
STT-10 10 Pairs 790 x 485 x 1930 / 2080 mm 1000 W
STT-15 15 Pairs 1110 x 485 x 1930 / 2080 mm 1000 W
STT-2x10 20 Pairs 790 x 680 x 1930 mm 1000 W
STT-20 20 Pairs 1430 x 485 x 1930 / 2080 mm 1000 W
STT-2x15 30 Pairs 1110 x 680 x 1930 mm 2000 W
STT-30 30 Pairs 2070 x 485 x 1930 / 2080 mm 2000 W
STT-2x20 40 Pairs 1430 x 680 x 1930 mm 2000 W
STT-2x30 60 Pairs 2220 x 680 x 1930 mm 2000 W



The stainless steel shelf system ERS is designed using the modular system and is characterised by its strength and stability.
Thanks to the use of high quality chromium-nickel steel the shelf system can be used in a wide variety of functions with regards to hygienic storage, not only in cooled and uncooled rooms with food, but it is also perfectly suitable for the storage of sterile goods in the medicinal fields.
The shelf is available in the standard depths of 400, 500 and 600 mm, and lengths of 600, 800, 900, 1000, 1200, 1400, 1500 mm. Since the shelves are hung into the shelving uprights, the clearance shelf depth is approx. 67 mm narrower than the nominal measurement. The combination of the different shelf lengths enable an optimal use of space. The use of special connection clamps for the corners enables an optimal placing of the shelves in L- or U-shapes.
TÜV „GS“ approval
Shelf Load 600 kg or 1200 kg depending on choice of shelving uprights. Load capacity with evenly distributed load according to type. See table >
The use of connection clamps for the corners reduces the capacity per type by 70% of the nominal load.
​
Shelving Uprights
Square tubes 25 x 25 x 1,5 mm with plastic end caps and adjustable plastic feet. Depending on the height and shelf load, 2 or 3 cross connectors with a profile of 50 x 3 mm are welded between the square tubes.To hang up the shelves, Stainless steel-bolts have been welded onto the square tubes in a 165 mm radius. Each shelving upright has 2 rivet nuts to screw the cross-brace. The whole shelving upright is electrolytically polished.
Closed Shelves
Depending on the length of the shelves, consists of 0,8 x 1,0 mm strong stainless sheets with brushed surface, folded 40 mm on all sides. The longitudinal walls are folded inwards.
Slotted Shelves
The slotted shelves correspond in their construction to the closed shelves and have slotted holes of 45 x 10 mm.
Cross Braces
Made out of flat material 25 x 2 mm with rounded-off edges and 4 holes to enable screwing between 2 shelving uprights.