Hygiene Station
The entry control device EK 400 guarantees a safe disinfection of hands through the tamper-proof two hand disinfection in connection with an - after successful hand disinfection unlocked - turnstile lock. The unit has a side-mounted canister holder and a multi-functional LED light, that indicates whether the unit is locked or unlocked. It can be either designated to be one-way only or at the press of a button go both ways.
Option
-
Pedestal for floor mounting
-
Left or right-mounted
-
As automatic soap dispenser
-
Mechanical turnstile
Technical data EK 400
Dimensions (WxDxH) 400/653 x 375/925 x 575 mm
Electrical connection 230 V/N/PE, 50/60 Hz
Power consumption 0,2 kW
The entry control device EK400 WR is a combination of the entry control device EK 400 and a touch-free hand wash basin with automatic soap dispenser. The unit is also equipped with a folded paper towel dispenser and paper towel waste basket.
When the hand wash basin is activated via sensor, soap is sprayed onto the palms through a separate automatic soap dispenser. After this the actual water flow is activated. This guarantees a compulsory and hygienic hand washing with soap.
Only when the hands have been washed with soap and disinfected does the turnstile unlock.
​
Option
-
Pedestal for floor mounting
-
Mounted on the left or right side
-
​
Technical data EK 400 WR
Dimensions (WxDxH) 800/1153 x 375/925 x 575 mm
Electrical connection 230 V/N/PE, 50/60 Hz
Power consumption 0,2 kW
Water connection 3/4" max. 43 °C
Water outlet DN 50
The entry control device EK 400 WRT is in its construction identical with the model EK 400 WR and only differs in the fact that the paper towel dispenser and the paper towel waste basket are replaced by the high-speed hand dryer HANDDRYER 2 which is integrated in the entry control device EK 400.
The integrated method of construction counteracts the possibility of contamination of the surroundings, since the splash water is diverted downwards through grating into the wash basin. The drying of the hands takes approx. 10 seconds. A multi-functional LED light simplifies the operation of the unit.
​
Option
-
Pedestal for floor mounting
-
Mounted on the left or right side
-
​
Technical data EK 400 WRT
Dimensions (WxDxH)1200/1553 x 375/895 x 800 mm
Electrical connection230 V/N/PE, 50/60 Hz
Power consumption3,4 kW
Water connection3/4" max. 43 °C
Water outletDN 50
The Entry Control Device EK 600 has been especially designed for the use in narrow passages as well as in escape and emergency routes. It can be installed in places where the use of conventional turnstiles has so far not allowed the free passage in emergency situations or the transport of bulky goods or appliances.In case the EK?600 is switched off by using the emergency switch, the arm of the turnstile which is in horizontal position, will automatically fold downward and thus clear the passage. In addition, it can be combined by an electromagnetically lockable door. Its lock is deactivated along with the turnstile and can be opened immediately. Only after the power supply is switched on again, the arm of the turnstile will autonomously fold up again and the turnstile returns into its starting position. The door will then be manually closed and automatically locked.Besides an entrance barrier, the EK?600 comprises a tamper-proof two-hand disinfection with a multifunctional LED light as well as a side-mounted canister holder. The device can be mounted directly on the wall or on the floor by means of an optionally available pedestal.
​
Option
-
Pedestal for floor mounting
-
Mounted on the left or right side
-
As automatic soap dispenser
-
Electromagnetically lockable door
-
​
Technical data EK 600
Dimensions (WxDxH) 600/853 x 445/995 x 1220/1400 mm
Electrical connection 230 V/N/PE, 50/60 Hz
Power consumption 0,2 kW
The entry control device EK 800 guarantees a safe disinfection of hands, through the use of a tamper-proof two hand disinfection in connection with a turnstile lock which only releases after disinfection has take place.
​
A multi-functional LED light simplifies the operation of the unit and indicates the fill level of the hand disinfectant, moreover signalling in case of a malfunction. It can be either designated to be one-way only or both ways.
​
Option
-
Pedestal for floor mounting
-
Mounted on the left or right side
-
Ready for connection to a data collection device
-
As automatic soap dispenser
-
Mechanical turnstile
-
​
Technical data EK 800
Dimensions (WxDxH) 800/1053 x 345/935 x 600 mm
Electrical connection 230 V/N/PE, 50/60 Hz
Power consumption 0,2 kW
The entry control device EK 800 TWIN is a two lane facility and guarantees a safe disinfection of hands through the tamper-proof two hand disinfection in connection with an – after successful hand disinfection unlocked – turnstile lock in both lines.
The unit has a side-mounted canister holder and in both lines a multi-functional LED light, that indicates whether the unit is locked or unlocked. It can be either designated to be one-way only or both ways.
Option
-
Ready for connection to a data collection device
-
As automatic soap dispenser
-
Exit with mechanical turnstile
Technical data EK 800 TWIN
Dimensions (WxDxH) 800/800/1053 x 480/1608 x 1445 mm
Electrical connection 230 V/N/PE, 50/60 Hz
Power consumption 0,4 kW
The portal turnstile PDK is made completely of stainless steel 1.4301, and can be used for wet and outside areas. Persons passing through push the barrier with little effort to the next position.
The turning speed is regulated by the person passing through. If a person does not pass through fully, the released turnstile re-locks after the set time period.
The portal turnstile exists in the following variations – mechanic, one-sided or both-sided electric.
Option
-
Ready for connection to a data collection device
Technical data PDK 1600
Dimensions (WxDxH)1605 x 1257 x 2365 mm
Passing throught height2100 mm
Electrical connection230 V/N/PE, 50/60 Hz
Power consumption0,2 kW