
Hand Washing

.jpg)
The hand wash basins HWB-S and HWB-K are designed specifically for the hygiene needs within the food processing industries.
The water can be turned on either via a sensor (HWB-S) or a knee valve (HWB-K) which is located in the front panel.
The wash basin is supplied assembly-ready with water discharge, includes faucet aerator, sensor or knee valve and temperature mixing valve.
Option
-
Integrated continuous flow heater
-
Battery-operated sensor armature
Technical data HWB-S/-K 40.29.25 HWB-S/-K 47.41.24
Dimensions (WxDxH)400 x 295 x 240 mm 470 x 410 x 240 mm
Basin size (WxDxH)345 x 250 x 110 mm 370 x 340 x 150 mm
Warm water connection 1/2"1/2"
Cold water connection 1/2"1/2"
Water outlet 1 1/2"1 1/2"
Electrical connection HWB-S …230 V/N/PE 230 V/N/PE


The Hand washing Hygiene Centres of the HWB-SWT and HWB-SWTD series have been especially designed for the use in rooms of the food retail trade, for businesses active in communal catering as well as for social/dry rooms in the food processing industry.
The model HWB-SWT is equipped with an automatic soap dispenser and a high-speed hand dryer, the model HWB-SWTD has an additional disinfectant dispenser.
All components are activated contact-free, exclusively via sensors.
The high speed hand dryer reliably dries hands in approximately 15 seconds.
The head cover can be easily folded up to replace/refill liquid soap or hand disinfectant and is held by means of a gas spring in the open position.
Siphon, joints and gaskets and small parts are not included.
Technical data HWB-SWT 40.29.30 HWB-SWTD 45.37.39
Dimensions (WxDxH) 430 x 355 x 1145 mm 565 x 420 x 1145 mm
Basin size (WxDxH) 345 x 240 x 150 mm 500 x 420 x 150 mm
Warm water connection 1/2"1/2"
Cold water connection 1/2"1/2"
Water outlet 1 1/2"1 1/2"
Electrical connection 230 V/N/PE, 50/60 Hz 230 V/N/PE, 50/60 Hz
Power consumption 1,35 W1, 35 W

Hand wash basin WR-ECO-1 serves, due to the robust build, for cleaning hands in the food industry.
The smoothly pulled up rear panel offers a safe splash-water protection and at the same time can be used to affix soap or disinfectant dispensers. The water can be turned on either via a sensor or knee valve. The knee valve is located in the slanted front panel. The sensor, depending on the model, is located either on the front or rear panel.
The wash basin is supplied assembly-ready with water discharge, includes faucet aerator, sensor or knee valve and temperature mixing valve.
Option
-
Anti-legionella control
-
Integrated continuous flow heater
-
Mounted soap and/or disinfectant dispenser
-
Supply from above
Technical data WR-ECO-1
Dimensions (WxDxH) 500 x 456 x 663 mm
Electrical connection sensor 230 V/N/PE
Warm water connection 1/2"
Cold water connection 1/2"
Water outlet 1 1/2"


The Hand wash Hygiene Centre WR-ECO-1 SWPD has been especially designed for the use in rooms of the food retail trade, for businesses active in communal catering as well as for social/dry rooms in the food industry.
It is equipped with an automatic soap and disinfectant dispenser, which are activated contact-free, exclusively via sensors. The hands are dried with paper towels.
The head cover can be easily folded up to replace/refill liquid soap or hand disinfectant and is held by means of a gas spring in the open position.
Option
-
Integrated continuous flow heater
Technical data WR-ECO-1 SWPD
Dimensions (WxDxH) 650 x 400 x 1135 mm
Basin size (WxDxH) 600 x 345 x 195 mm
Electrical connection sensor 230 V/N/PE
Warm water connection 1/2"
Cold water connection 1/2"
Water outlet 1 1/2"


The WR-ECO-1-ASF is designed as the ECO-1, except with base designed as double door cupboard for storage of objects such as cleaning agents, cleaning utensils and boiler.
Option
-
Anti-legionella control
-
Floor or wall mounted
-
Integrated continuous flow heater
-
Mounted soap and/or disinfectant dispenser
-
Supply from above
Technical data WR-ECO-1-ASF
Dimensions (WxDxH)500 x 456 x 663/1345 mm
Electrical connection sensor 230 V/N/PE
Warm water connection 1/2"
Cold water connection 1/2"
Water outlet 1 1/2"
.jpg)

The wash basin WR-ECO-1-SDS-A is suited, due to the automatic liquid soap dispenser, to the tamper-proof hand washing in the food processing industry. Only after both hands have been registered by the sensors integrated within the head panel, the soap is released, the flow of water can then be prompted by the sensor in the rear panel.
The equipment can be attached by means of a potential free contact to a traffic light device, a door opener or a turnstile.
The wash basin is supplied assembly-ready with water discharge, includes faucet aerator, sensor and temperature mixing valve.
Technical data WR-ECO-1-SDS-A
Dimensions (WxDxH) 500 x 355 x 725 mm
Electrical connection 230 V/N/PE
Warm water connection 1/2"
Cold water connection 1/2"
Water outlet 1 1/2"

Technical data
WR-ECO-2 Dimensions (WxDxH)1050 x 450 x 650 mm
WR-ECO-3 Dimensions (WxDxH)1550 x 450 x 650 mm
WR-ECO-4 Dimensions (WxDxH)2050 x 450 x 650 mm
WR-ECO-5 Dimensions (WxDxH)2550 x 450 x 650 mm
WR-ECO-6 Dimensions (WxDxH)3050 x 450 x 650 mm
Electrical connection sensor230 V/N/PE
Warm water connection3/4"
Cold water connection3/4"
Water outlet1 1/2"
The washing channel WR-ECO is available with 2 - 6 washing bays. The smoothly pulled up rear panel acts as splash-water protection and at the same time offers space to affix soap and/or disinfectant dispensers.
The water can be turned on either via a sensor or knee valve. The knee valve is located in the slanted front panel. The sensor, depending on the design, is located either in the front or rear panel. The drainage plug can be positioned left, right or in the centre.
Option
-
Anti-legionella control
-
Integrated continuous flow heater
-
Mounted soap and/or disinfectant dispenser
-
Sensor controlled soap dispenser with central supply
-
Rear wall panelling
-
Installation feet for positioning on the floor
-
Media supply from above


The Hand Hygiene Centres WR-ECO SWT and WR-ECO SWTD are available with 1 – 4 wash places. The integration of soap dispenser, water outlet and high speed hand dryer in the upper panel enables hand cleansing which is hygienic and especially space-saving.
The model WR-ECO SWT is equipped with an automatic soap dispenser and a high-speed hand dryer, the model WR-ECO SWTD has an additional disinfectant dispenser.
All components are activated contact-free, exclusively via sensors.
The high speed hand dryer reliably dries hands in approximately 15 seconds.
The head cover can be easily folded up to replace/refill liquid soap or hand disinfectant and is held by means of a gas spring in the open position.
Option
-
Rear wall panelling
-
Support feet for setting up on the floor
-
Standing unit with base cabinet
Technical data
WR-ECO-1 SWT/D Dimensions (WxDxH)600 x 400 x 1135 mm
WR-ECO-2 SWT/D Dimensions (WxDxH)1200 x 400 x 1135 mm
WR-ECO-3 SWT/D Dimensions (WxDxH)1800 x 400 x 1135 mm
WR-ECO-4 SWT/D Dimensions (WxDxH)2400 x 400 x 1135 mm
Electrical connection WR-ECO-1…3 SWT/D230 V/N/PE
Electrical connection WR-ECO-4 SWT/D400 V/N/PE
Warm water connection3/4"
Cold water connection3/4"
Water outlet1 1/2"
DISPENSERS


The soap/disinfectant dispenser SDS is constructed from a stainless steel casing in either open or closed designs.
The rounded construction prevents objects such as cigarettes being placed on top of it. The scope of delivery includes a 1000 ml plastic refill bottle.
Technical data SDS
Dimensions (WxDxH) 97 x 90 x 325 mm
Dimensions with lever 97 x 240 x 325 mm
Capacity 1000 ml


The automatic soap/disinfectant dispenser SDS-A is delivered in a splash-water protected stainless steel casing for wall mounting, and is operated by battery.
The battery holds 3x1,5 V batteries for up to 10,000 operations.
The capacity of the dispenser is 900ml of liquid.
Technical data SDS-A
Dimensions (WxDxH) 110 x 115 x 270 mm
Capacity 900 ml
Battery operated 3 x 1,5 V (Typ C) = 4,5 V


The hand disinfection unit HANDI-1 has been developed especially for both the food processing industry and frequently visited public buildings, and guarantees a safe disinfection of the hands with the help of two nozzles.
After the hands have been detected by the sensor, the disinfectant is sprayed. The canister with a capacity of up to 5000 ml is sealed inside the casing and thereby protected against unintended use.
Option
-
Pedestal for floor mounting
Technical data HANDI-1
Dimensions (WxDxH) 340 x 278 x 605 mm
Capacity up to 5000 ml canisters
Electrical connection 230 V/N/PE, 50/60 Hz

The 2-hand disinfection unit HANDI-2 COMPACT was developed especially for use in the food processing industry and guarantees a tamper-proof disinfection of both hands with 4 nozzles. After the hands have been detected by the sensor, the unit activates the process of disinfection and passage control. The passage control may consist of a traffic light control, a door release mechanism or a turnstile.
The unit has an integrated canister holder for the disinfectant, with an alarm when canisters are empty, as well as a receptacle for any leftovers.
Option
-
Floor or wall-mounted unit
-
Time and data recording can be integrated
-
Alarm function
-
Technical data HANDI-2 COMPACT
Dimensions (WxDxH) 450 x 340 x 920 mm
Capacity up to 10000 ml canisters
Electrical connection 230 V/N/PE, 50/60 Hz


The high-speed hand dryer HANDDRYER-1-A has been especially developed for dry rooms, such as social rooms in the food industry, communal catering and other rooms not constantly exposed to high humidity.
In order to reduce contamination of the environment by splashing water, water blown away during the drying process will be diverted downwards in the device in a controlled manner and disposed of via the outlet fitting.
Option
-
Collecting vessel for residual water
Technical data HANDDRYER-1-A
Dimensions (WxDxH) 350 x 210 x 641 mm
Electrical connection 230 V/N/PE, 50/60 Hz
Power consumption 2,5 kW


The automatic high-speed hand dryer HANDDRYER-2 is especially suited for very fast hygienic drying of both hands and is delivered with a splash-water protected stainless steel body for wall mounting.
During the drying process water that is blown away is diverted downwards through grating and disposed of via the drain in order to prevent contamination by splashing water.
The unit and hand slot can be easily cleaned. Hand drying takes approx. 10 seconds. The air velocity is adjustable.
Technical data HANDDRYER-2
Dimensions (WxDxH) 400 x 195 x 620 mm
Electrical connection 230 V/N/PE
Power consumption 3,2 kW
Fan motor 18.000 rpm
Heating 2 x 450 - 900 W
Air speed 75 - 100 m/sec
